| Peak
Light |
Comes
on 6 dB below clipping. |
| Mic
Input |
Selected
for Main channel. |
| Sub
Master Enable Switch |
Assigns
channel to become a submaster. |
| Line
Input |
Selected
for Main channel |
| Sub
Direct Output |
Buss
master level control. |
| Trim
Controls |
Dual
inputs for Mic and line. |
| Phase
Reverse and +48v Phantom Power |
Switchable
for every channel. |
| Left
/ Right Assign |
Separate
left and right assignment. |
| LEDs |
LEDs
on every submaster assign switch. |
| Sub
Master / Tape Return Selection |
Tape
return/Submaster section can get its signal from Mic,Line or
Tape return when not in Submaster mode. This means another set
of inputs with EQ and Auxiliary send access. |
| Sub
Master / AUX / EQ Flip |
Sends
whatever is in the tape return / Submaster section through the
Main channel EQ section and one half of the Aux sends. |
| Sub
Master / Tape Return Fader Flip |
Swaps
the function of the short (60 mm) fader and the long (100 mm)
fader in all modes. |
| Sub
Master / Tape Return Pan Control |
Pot
assigns whatever is the Tape return / Submaster section to the
L + R stereo Buss. |
| Sub
Master / Tape Return 2 And Band EQ |
2
band EQ Magic |
| Sub
Master / Tape Return Fader |
60
mm fader. |
| Sub
Master / Tape Return LEDs |
5
segment LED ladder for visual level indication. |
| Sub
/ Tape Return L - R Buss Enable |
Connects
this section (10) to the L-R Main Buss. |
| Sub
/ Tape Return Solo |
Sends
this section (10) to the Solo Buss. |